Product Description

Description of RTV Liquid Silicone Rubber For Soap Molds

DC-C20 China Factory Supply RTV Liquid Silicone Rubber For Soap Molds is a kind of room temperature vulcanized silicone rubber in condensation type. It’s generally named as two part silicone rubber, Part A is a flowable liquid silicone, Part B is the curing agent (Tin catalyst) . It’s mainly used for mold making.

 

 

Typical Applications of SuperSeptember China Factory Supply RTV Liquid Silicone Rubber For Soap Molds

DC-C20 China Factory Supply RTV Liquid Silicone Rubber For Soap Molds is used for making molds of concrete stone, GRC, gypsum decoration, plaster ornaments, fiberglass products, polyester decoration, unsaturated resin crafts, polyresin crafts, polyurethane, bronze, wax, candle, and similar products.

Technical Parameters of SuperSeptember China Factory Supply RTV Liquid Silicone Rubber For Soap Molds

Model	Color	Mixing ratio (%)	Pot life (mins, under 25℃)	Curing time	Hardness  ( Shore A )	Tensile- strength  (MPa)	Tear- strength (kN/m)	Viscosity (After A/B mixed ,mPa.s)	Shrinkage rate (%)	Elongation (%)
DC-C30	White	100:2	30-40	(3-5hrs under 25℃); (20-30 mins under 60℃)	30±2	>4.8	>24	25000±5000	<0.25%	> 500%

 

SHELF LIFE:

12 months when stored under 25°C in original unopened packages.

Packaging & Shipping

25KG/drum vacuum packing for part A +1kg/ bottle catalyst for part B;9/18drums/pallet;

200KG/drum packing for part A +1kg/ bottle catalyst for part B; 1//2/4drums/pallet;

 

Our Services

Techinical Support

Normally, different silicone should be choosed according to different product's features,for example :

- For products size (within 20cm), 
with intricate disigns, soft silicone is suitable, such as 10-20 shore A.

- For products size (20cm-80cm), 
with intricate designs, 20-25 shore A is suitable. 
with simple designs, 25-30 shore A is suitable.

- For products size (80cm-150cm), 
with intricate designs, 25 shore A is suitable.
with simple designs, 30-35 shore A is suitable.

- For products size (more than 150cm), 
with intricate designs, 25-28 shore a A is suitable.
with simple designs, 35-40 shore A is suitable. 

Company Information

 Shenzhen Zhihua Chemical Co., Ltd.(DC SILICONE) waswas established in 2008,is a science and technology Company which is concentrating on production, R&D, and sales of Chemical products, especially silicone rubber. We are praised as the leading professional manufacturer of Mould Making Silicone Rubber,Addition Silicone Rubber,Life Casting Silicone Rubber,Electronic Potting Compound,Pad Printing Silicone Rubber,and so on.we are welcome to all the customers come to visit our factory and have a fruitful bussiness relationship.

 

FAQ

Q: Do you have a factory?
A:We have factory in Shenzhen. As a leading manufacturer of silicone rubber in China, we are standing in silicone field for nearly 10 years, depends on our high quality products and best service.

Q:How can I get the samples?

A:1,We are honored to offer you samples. Testing is believing. So we can provide you 1kg free sample by air. The silicone sample is free for you, and you should only pay the small part of shipping cost by air. But when we have a successful cooperation in the future we will return the air shipping cost you paid before.

Q: How about the lead time?

A: Within10-20 days after getting the prepayment.

Q: How can we pay?

A: For small sample shipping cost, you can pay either by paypal or western union or by T/T.

Q: Can you do CO, Form E, Form F, Form A etc? 

A: Yes, we can do them for you without extra cost. We are always finding ways to save cost for you.

Characteristics

*Good operability, easy to demold

*Moderate hardness

*High tensile and tear strength

*Cure at room temperature

*Good flexibility

*High duplication times  

Operation instruction

Step 1: prepare the original molds

Make your original molds perfect fix it on a board. And fix the original mold on a board , then used four piece of board to enclose the original molds.

 Step 2: Take 100 G parts A and add 2G parts B and mix them evenly.

Notes: Mold making silicon rubber is a kind of flowing liquid ,it contains two parts. Part A is a kind of flowing white liquid and part B is the curing agent or catalyst .Pls follow the step strictly:

         1.Weigh the two part exactly by electronic weight. If not, for example add too much catalyst , the operation time will be too fast to operate ,which will cause inconvenience to operate .

         2.Mix part A and part B evenly. Otherwise the silicon rubber will be partly solidified and this will give birth to difficulties in your final operation. What’s more, the finished molds will meet a short life. All of these will cause a waste of silicon rubber.

 Step 3:Vacuum pumping

Without exception, this step takes less than 10 minutes.Otherwise,it will cause cross linking reaction,

and no more further steps will be available.

Step 4: Pouring casting or Brush operation

*Notes:1. For simple pattern products we suggest use pouring operation way, which will be very easy to operate and demould. Pourable silicone require low viscosity which will be easy to flow smoothly and easy to de-air .

        2.For delicate pattern products we suggest use brushing operation way, which can copy the pattern exactly . Brushable silicone require high viscosity which won’t be easy to flow away and easy to brush .  

        3. We sugges to set the silicone mold for another 12 hours after demould before you put it into a large production .

Contact Us * Ms.Emily Email: emily@dcsilicone.com Mob & Whatsapp/Wechat: +86 13809730195

 

Payment Terms︰ TT/LC/Western Union

Lead Time︰ 3-7 days after we confirm your payment in our bank

Product Image